![]() ![]() The fuel lines clear the OEM fuel pump cover and do not require any cutting or drilling to get them past the fuel tank. The feed and/or return hose can be easily modified for installation of an in-line flex fuel sensor. The kit includes -8AN (1/2") feed hose that runs from the fuel pump hanger through the provided fuel filter. A -8AN 90 degree PuskLok hose end is included for connecting to an -8AN male aftermarket fuel rail fitting (not included). A -6AN (3/8") fuel hose runs from the FPR (not included) to the fuel pump hanger return port. A -6AN 90 degree PuskLok hose end is included for connecting to an -6AN male aftermarket FPR fitting (not included). The fuel lines run though billet aluminum fuel brake line retainers. These plumbing kits include everything required to plumb the fuel system between the Radium pump hanger and the fuel rail. This kit is NOT designed for the stock fuel rail. All necessary fittings are included for an easy bolt-in installation.20-0703-0X FUEL HANGER PLUMBING KIT, EARLY NISSAN In addition, two FPR adapters are included to reuse either variation of the Mitsubishi OEM fuel pressure regulator. This kit replaces the restrictive OEM banjo bolt and runs a 6AN (3/8") hose directly from the fuel filter to the fuel rail. The plumbing kit includes the items in the image below and is ideal when when using the factory regualtor and fuel lines. This is perfect for installers building a custom fuel system.Ģ0-0533-PK Fuel Rail Plumbing, Mitsubishi, Early 4G63 All fittings must be purchased separately. ![]() This option includes only the basic fuel rail as shown in the picture below. This can be discussed with the fuel injector manufacturer.Ģ0-0533-02 Fuel Rail, Mitsubishi, Early 4G63 ![]() If planning on using aftermarket fuel injectors, make sure they have the same upper and lower O-ring size as well as the same overall length as the OEM injectors. This fuel rail features 11mm injector bores and was designed around the OEM fuel injectors. Mounting bosses mimic the factory fuel rail for securing the cable(s) that pass by with the OEM brackets. Furthermore, phenolic washers are provided for the stainless steel mounting hardware. The fuel rail reuses the 3 OEM mounting spacers (Mitsubishi MD095402) to thermally insulate the fuel rail from the intake manifold. The Radium fuel rail eliminates the OEM 2-bolt inlet flange which uses a restrictive 0.22" (5.7mm) orifice. It is compatible with all fuel types including popular alcohol mixtures such as E85. The rail is CNC machined from solid 6061 aluminum, anodized and laser etched for a high quality surface finish. Manufactured with a large 0.69" internal bore, the fuel rail can support all necessary engine power requirements. ![]() To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.įor any ports that are not going to be used, simply install an 8AN ORB plug. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. Appropriate fittings must be selected based on the specific application and type of hose to be used. ![]()
0 Comments
Leave a Reply. |